Brick Veneer Wall

by Logan Hendrickson August 25, 2011

Brick Veneer Wall

We've been changing up the guest bedroom/den lately and started with furring out the log walls, which is basically just building a wall over an existing wall. We loved the log walls but the problem was that the original builders never sealed or treated any of them (inside or out) so spiders could pretty much just waltz right in whenever they wanted between the logs and cracks. The first wall, I dry-walled and smoothed but for the second wall, we decided to brick it. I obtained a bunch of thin brick veneers about a year or so ago FOR FREE. Driving through the neighborhood, I noticed a couple pallets of them laying out in the middle of the desert behind a church. When my dad and I knocked on the door and asked if they belonged to the church, they told us we could have them. SCORE. We made off with about 4 full pallets of real thin brick veneers. Roxy and I used most of them on the master bathroom and shower (photos soon) and the living room wall but still had a few left over. Most of the left-over bricks were cracked and broken, but they still worked by just staggering the joints and using them randomly.

I framed the wall out of 2x3's and covered it with 7/16" OSB (rough side out). Then, starting from the bottom corner, I spread stone setting cement about 2' high at a time with a notch trowel. I stuck the bricks on the wall, using 1/2" blocks of wood for joint spacers.

After all of the bricks were stuck, I mixed up some mortar and grouted the joints using a brick trowel and 1/2" tuck trowel. I'm sorry I didn't really take pictures of this part but what you do is; scoop up some mortar with the brick trowel, hold it up against the wall (even height with the joint) and scrape mortar off the brick trowel with the tuck trowel into the joint. It sounds impossible, but once you get going you become a pro and speed up pretty quick. After all of the joints are mortared, I let it dry a little while, but not completely. Once it's at this stage I use a 3/8"-1/2" striking tool, or "brick jointer", to scrape off the excess mortar and clean up the joints. Then just vacuum the walls and floor like crazy. For the window jamb, I used some more of the old decking we ripped out of the front porch. I've also used this stuff for wall paneling and the desk/bench. I pulled the nails, ran it through a thickness planer, and put a coat of lacquer on it. I ripped the pieces down to about 5" wide, allowing it to stick a little out past the wall. Rather than trimming it out with another casing, I mortared right up to the jamb for a cleaner look.

This isn't something that really takes alot of skill, it's just sort of tedious and I'm sure there's many tutorials online that explain it better. It's amazing how much a few bricks can change the whole feel of a room though. P.S. never-mind the orange tablecloth blocking out the sun, I'm making some more roll-up canvas shades for these windows next.



Logan Hendrickson
Logan Hendrickson

Author



2 Responses

Logan
Logan

September 23, 2015

Yeah, I got really lucky with these. You can buy them online but they are about $7/sqft

Tamara
Tamara

September 23, 2015

What a luck to get these bricks for free! And it looks great. I always wanted to have a wall like that… but I don’t know if it will ever happen until I also find a pallet of free bricks. and that doesn’t happen so often in austria :D

Leave a comment

Comments will be approved before showing up.


Also in oft blog

Plywood pendant wall brackets
Plywood pendant wall brackets

by Logan Hendrickson February 15, 2017

Continue Reading

Rocking horse
Rocking horse

by Logan Hendrickson October 11, 2016 1 Comment

Continue Reading

Bench/lamp/end table
Bench/lamp/end table

by Logan Hendrickson July 26, 2016 5 Comments

Continue Reading

Everything is made to order:
Everything for sale on our website is made to order with listed estimated lead times in product listings. If an item is available to purchase, that does not mean it is "in stock". Lead times are listed in product descriptions. If you have a project deadline and need to know about possible expediting, please send us an email.
International orders:
Customers are responsible for any and all; import duties, taxes or fees collected at delivery. Onefortythree does not cover any of these additional fees at time of purchase.
Returns:
Unused and undamaged items up to 30 days from the time of delivery can be returned for a refund or exchange.  Inspect your package upon delivery to ensure it wasn’t damaged during shipping. Please make sure you have provided an accurate shipping address, onefortythree is not responsible for any additional shipping costs on unclaimed and/or returned packages. Shipping costs will not be refunded.
Shipping:
Please double check that you have provided an accurate shipping address at checkout. Once your package ships, you will receive a tracking number to follow your package. Any packages that are undeliverable or unclaimed and returned to onefortythree will require an additional shipping cost to re-send.